Deer Creek, IL
309-369-2248
DUAL LINK SERIES TILE PLOW
An easy to operate, affordable pull type commercial tile plow is now available. Now you can have the accuracy of a commerical plow at the drop of a pin. More accurate grade control, pitch and elevation. No worrying about soft bottoms, extreme angles, or going through waterways and ridges. Slope and elevation control, the best of both worlds.
70DL - 7' Dual Link Tile Plow
Available Boot Sizes
Recommended Power
Depth Gauge
Pitch Gauge
Weight
Tiling Depth
3", 4", 5", 6", 8", 10", 12"
250-750 HP
Fully Adjustable
Fully Adjustable
10,000 lbs
Up to 84"
DUAL LINK CONTROL
The most accurate way to lay tile is with pitch and elevation. Legacy Equipment's Dual Link plows utilize lift cylinders to control elevation and the pitch cylinders to control slope. Combining the accuracy of dual link with Legacy Equipment's expert design, creates the easiest pulling, simplest commercial plow on the market today.
NUMERICAL EASY TO READ GAUGES
O'Connell Drainage by Legacy Equipment is the leader in easy to use, easy to understand, quality equipment with all new pitch and depth gauges. Why settle for water levels that are hard to see and hard to use when you can have a numberical pitch gauge that tells you what the plow angle truly is. Don't waste time trying to see a chain or wondering if electronics are telling you the truth. Know where your tile is all the time, with our easy to read numerical depth gauge.
GROUND FILTRATION
The shank on the Dual Link Tile Plow is designed to fracture the ground and allow more soil to come back into the trench and filter down to the tile. Doing this helps the tile drain faster and more efficiently from the beginning. It also creates less of a mess than other plows on the market that push the soil too far away from the center of the trench.
HIGHEST LIFT AVAILABLE
The Legacy Equipment - 70DL lifts 32" above the ground, the highest lifting pull-type tile plow in the industry. The higher the lift, the easier it is to back over the start hole.
ASTM F449-02 6.5 COMPLIANT
Lay tile as recommended by the ASTM. All Legacy Equipment plows and Quick Attach Trailing Boots comply with the ASTM F449-02 6.5 for correct tile placement and proper bedding of the soil. Hava a V-bottom when the ASTM recommends and a trapeoidal bottome for larger tile sizes. V's don't cause erosion: flat bottoms do cause crushing. Support your tile the proper way.
QUICK ATTACH TRAILING BOOT
The Legacy Equipment Quick Attach Trailing Boot is the easiest and quickest trailing boot to change in the industry. Spend less time changing boots and more time tiling. Designed for and available in 3",4" 5",6",8",10", and 12" sizes.
The Dual Link series plow is sold with a 4" Quick Attach Trailing Boot standart. Optional Quck attach Trailing Boots are 3",5",6",8",10", and 12" sizes.
GALLERY
